⎝⎛大家玩棋牌⎞⎠

Welcome to the official website of Qingdao Luode General Machinery Equipment Co., Ltd.!

Order Online | Favorite Rhodes | Site Map
National Consulting Hotline 400-800-5717

青岛罗德通用机械设备有限公司

中石化、中石油、中海油长期供应商 Cam Rotor Pump Manufacturers Sinopec, PetroChina, CNOOC Long-term Supplier

罗德泵凭借卓越的性能,在石油市政化工码头造船轻工等诸多行业得到广泛应用
You are here: ⎝⎛大家玩棋牌⎞⎠ »» Road Information » Industry Information » Application of Cam Rotor Pump in Sewage Oil Lifting Station

Application of cam rotor pump in sewage oil lifting station

查看手机网址 Editor-in-chief: Check the mobile website
scan it! 凸轮转子泵在污油提升工位的应用 scan it!
发表时间:2019-09-06 09:35【 Popularity: -Published time: 2019-09-06 09:35 [Large Middle Small]

PetroChina, Sinopec, CNOOC's reserve oil depots and refineries, the treated sewage oil needs to be lifted and transported to the collection device through pump equipment. This station has special features for the pump's self-priming capacity, corrosion resistance, and maintenance methods. Requirement: When designing pumps in the design institute of the project, these three points should be fully taken into consideration. The problem with maintenance methods is that the available space in the entire plant is limited, large equipment cannot be accessed, and complete dismantling of the pipeline is not realistic.

凸轮转子泵

In a petrochemical group in Fujian, because of economic factors, a long-shaft submersible pump was selected. For a long time, the flow is unstable and the self-priming cannot meet the requirements. The entire production line needs to be shut down during maintenance, which leads to later time and labor. The cost increased. After fully understanding and communicating with the Rotor cam rotor pump in detail, the liquid pump was replaced at the station of the sulfur pool sewage oil lift pump.

Technical advantages of cam rotor pumps compared to submersible pumps:

① The principle of positive displacement pump, ground-mounted, self-priming capacity can reach 8.7 meters, the self-priming capacity of sewage oil lift pump station (medium with viscosity) can reach 5-6 meters.

② Stable flow, small vibration, low noise, small footprint

③ Easy to open the pump cover, without affecting the pipeline and transmission device, repair and replace the accessories separately.

凸轮转子泵易开启式泵盖

This station has applied the cam rotor pump so far, and has not changed the accessories in 37 months, and the operation is stable, although the price at the time of purchase is usually double that of the submersible pump.

Qingdao Rohde General Machinery's cam rotor pump has been used in the petrochemical industry for many years, and has accumulated a lot of product application experience. If you have the purchase intention of a rotor pump, please call 400-800-5717 for consultation.

Qingdao Luode General Machinery Equipment Co., Ltd. Qingdao Luode General Machinery Equipment Co., Ltd. Record number: Lu ICP No. 13022300
Phone: 0532-55576556 Fax: 0532-55576556
Email: roeder001@163.com QQ: 3249598812
Company Address: No. 3, 1st Road, Dongge Industrial Park, Chengyang District, Qingdao, Shandong Province

Lu Gongwang Security No. 37021402000887

欢乐拼三张 欢乐拼三张 七乐彩 天天电玩城