⎝⎛大家玩棋牌⎞⎠

Welcome to the official website of Qingdao Luode General Machinery Equipment Co., Ltd.!

Order Online | Favorite Rhodes | Site Map
National Consulting Hotline 400-800-5717

青岛罗德通用机械设备有限公司

中石化、中石油、中海油长期供应商 Cam Rotor Pump Manufacturers Sinopec, PetroChina, CNOOC Long-term Supplier

罗德泵凭借卓越的性能,在石油市政化工码头造船轻工等诸多行业得到广泛应用
You are here: ⎝⎛大家玩棋牌⎞⎠ »» Rohde & Schwarz » Frequently Asked Questions » Precautions in Rubber Rotor Injection Process

Precautions in the rubber rotor injection process

查看手机网址 Editor-in-chief: Check the mobile website
scan it! 橡胶转子注胶工艺中的注意事项 scan it!
发表时间:2020-01-15 09:35【 Popularity: -Published time: 2020-01-15 09:35 [Large Middle Small]

The rubber rotor injection process mainly involves the processing of the metal skeleton and the injection mold. During the operation, the following points should be noted:

1. In the metal skeleton processing step, the high-temperature degreasing is heated in the form of an oven, and the temperature is set to 200 ° C-250 ° C;

2. After the blasting operation, the volatile solvent is one of benzophenone and xylene;

3. In the glue coating operation, the drying method can be dried or air-dried. The drying temperature is set at about 120 ° C, the time is about 10 minutes, and the air-dried time is longer;

4. Two layers of glue are selected;

Qingdao Luode General Machinery Equipment Co., Ltd. Qingdao Luode General Machinery Equipment Co., Ltd. Record number: Lu ICP No. 13022300
Phone: 0532-55576556 Fax: 0532-55576556
Email: roeder001@163.com QQ: 3249598812
Address: No. 3, First Road, Dongge Industrial Park, Chengyang District, Qingdao, Shandong Province

Lu Gongwang Security No. 37021402000887

欢乐拼三张 欢乐拼三张 七乐彩 天天电玩城